Loading...

Epoxy Fix Super Strong

Selleys Epoxy fix Super Strong is a 2 part epoxy adhesive which provides superior strength for areas needing that extra bond strength.

 

Features

  • Ideal for areas needing a strong & durable bond strength

Ideal For 

  • Porcelain, metal, wood, marble, concrete, pottery and most plastics
Categories: ,
Size 35mL Blister pack
Colour Part A: Clear

Part B: Light Amber

(Both parts combined becomes slight yellow)
Cure Time Sets in approximately 90 minutes
Use Interior/Exterior Applications

Where can this product be used?

  • Load bearing repairs
  • Gluing the head back on your hammer
  • Fixing loose table or chair legs.
  • Bonding solid pieces of aluminium sheeting
  • Bonding fiberglass sheets

What materials is this product suitable for?

  • Glass
  • Chinawares
  • Ceramics
  • Ivory
  • Metal
  • Wood

How To Use

  1. Surfaces to be repaired should be clean, dry and free from dirt or grease.
  2. Unscrew caps of each tube and pierce with own cap to avoid contamination. Dispense equal amount of resin and hardener (Part A and B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 30 minutes and will start to thicken
  3. Apply surfaces to be repaired and allow to harden.
  4. To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.

Limitations

  • For exterior applications, always ensure product is well dried at for least overnight (24 hours) before exposing to environment
  • Not suitable for bonding plastics such as Polypropylene and Polyethylene

Clean Up

  • Clean all tools or equipment used while adhesive is still in its uncured state.
  • Use acetone, toluene, methyl ketone or kerosene to clean tools and spills.

Data Sheet

SDS-Epoxy Fix Super Strong

TDS – Epoxy Fix Super Strong