All Clear

Selleys All Clear is a multipurpose crystal clear sealant that is suitable for use on most general sealing applications. It’s crystal clear appearance leaves a seamless finish.



  • Works on wet, oily and dirty surfaces
  • Crystal clear finish
  • Paintable
  • Mould and mildew resistant
  • Water resistant
  • Strong adhesion

Ideal For 

  • Glazing, roofs, guttering, bricks, cement, timber, windows, frames, many plastics sinks and basins.
Categories: ,
Size 75g Tube
Colour Crystal Clear
Full Cure Time Cures is 8 hours, best to be left 24 hours
Technology Co-polymer
Use Exterior/Interior Application

Where can this product be used?

  • Sky lights
  • Window frames and glazing (non structural)
  • Roof and gutters
  • Sealing metal or PVC guttering and down pipes
  • Air conditioners entries
  • Sealing metal or PVC guttering and down pipes
  • Shower screens
  • Sinks and basins

What materials is this product suitable for?

  • Metal
  • Timber
  • Glass
  • Glazed tiles
  • Brick
  • Stone
  • Many plastics (may damage polystyrene and polycarbonate)

How To Use

Use only in a well ventilated area. Avoid contact with skin and eyes and breathing vapors.

  1. Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry)
  2. Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
  3. Pierce tube with reversed side of cap.
  4. Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle
  5. Apply on needed surface and, smoothen with a scraper or spatula
  6. Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 6-8 hours


  • May damage some plastics – eg. polystyrene and polycarbonate.
  • Not for permanent water immersion – eg. fish tanks.
  • Not suitable for use over silicones.
  • Not suitable for polystyrene foam.

Handy Tips

  • Wet surfaces – can be applied to clean, wet non-porous surfaces (eg, metals, glass , glazed tiles)
  • Fast skinning – skins in 5 minutes
  • Paintable once dried with both water based and oil based paints
  • Store in a cool and dry place below 30 degree Celsius

Clean Up

  • Uncured product may be removed with mineral turpentine.
  • Cured product can be removed by cutting and scraping.

Data Sheet

SDS-All Clear

TDS-All Clear