All Fix – Selleys Malaysia DIY Solutions For Your Home

Size	30g & 80g Blister pack
Colour	White
Full Cure Time	Cures in 6 hours, maximum cure in 24 hours
Use	Interior applications

Where can this product be used?

What materials is this product suitable for?

How To Use

Surfaces to be bonded must be dry, free from grease, oil and dust.
Apply Selleys All Fix on needed surface and leave to dry for at least 6 hours
Time to develop bond is increased if surfaces are non-porous or in wet, damp and cool weather.
Adhesion may take up to 24 Hours
NOTE: Slow-dry adhesives gives maximum bonding results.
Form bonds immediately by pressing parts firmly together or clamped.
Can fill minor hairline gaps if needed (not exceeding 10mm)
Wipe away excess adhesive with a damp cloth. Dried adhesive is best removed by scraping.
Not suitable for bonding plastic such as polyethylene, polypropylene, mirrors, other flexible plastics and rubbers.
Use temporary supports when bonding a heavy load – support until adhesive dries.
Product to be stored in cool dry place.

Limitations

Not suitable for permanently wet or damp areas.
Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Aluminium
*Not suitable for polyethylene and polypropylene.
Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
Not resistant to strong acids and strong organic solvents.
Do not apply below 10°C.
When used near brass or copper, the immediate area of contact will discolour to a blue tone.

Not suitable for permanently wet or damp areas.
Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Aluminium.
*Not suitable for polyethylene and polypropylene.
Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
Not resistant to strong acids and strong organic solvents.
Do not apply below 10°C.
When used near brass or copper, the immediate area of contact will discolour to a blue tone.