Loading...

Knead It Multipurpose

Selleys Knead It Multipurpose is a versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded, and painted.

 

Features

  • Easy to use – no mess.
  • Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
  • Good adhesive strength.
  • Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
  • Good gap filling properties.
  • Long-lasting, durable solution.
  • Heat resistant to 120°C continuously or 140°C intermittently.
  • Rapid set time (<10 minutes)
Categories: ,
Size 50g Tube
Colour Off-white and Gray
Technology Epoxy
Use Exterior, Interior

Where can this product be used?

  • Repair and replacement – timber, metal, masonry, many plastics*, ceramics
  • Mending – toys, appliances, sports equipment etc
  • Sealing – leaks in gutters and downpipes
  • Patching – chipped concrete, floors, bricks, blocks etc
  • Attaching – fixtures, machine tags, signs etc
  • Moulding – to reform-reshape damaged timber, metal, masonry, plastics, ceramics
  • Moulding to rebuild – wrought iron fencing
  • Forming knobs and missing parts
  • Balancing – table legs etc
  • Fixing a damaged roof tile
  • Lost the head off your hammer? Make a new one with Knead It.

What materials is this product suitable for?

  • Wood/Timber
  • Concrete
  • Anchoring bolts
  • Metal
  • Masonry
  • Most plastics*
  • Ceramics

*Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.

How To Use

  1. Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
  2. Cut off required amount. To mix, knead with fingers to a uniform colour.
  3. Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
  4. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
  5. Trim away any excess before initial hardening.  Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
  6. After 5-10 minutes, Knead It Multipurpose will harden and begin to form a strong bond. After 60 minutes, Knead It Multipurpose may be drilled, sanded, machined, filed, sawed or painted.
  7. Wash hands thoroughly with soap and water before product hardens.


Limitations:

  • Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
  • *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.

Handy Tips

  • Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed. A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead It.
  • To help determine when your Knead It has set, keep a small piece off to check – when it is hard, it indicates your job is done.
  • Set time increases at temperatures below 20°C.

Clean Up

  • Remove excess and hand rub with water or a damp cloth before hardening begins.

Data Sheet

SDS-Knead It Multipurpose

TDS-Knead It Multipurpose