Wet Area Speed Seal

Selleys Wet Area Speed Seal is an advanced silicone sealant technology that delivers a super fast cure and stiff consistency producing a waterproof / shower ready seal in 1-2 hours*.



  • Super fast cure and stiff consistency provide a waterproof seal to allow shower use 1 hour after application*
  • 100% silicone sealant
  • Superior waterproof seal
  • Built in fungicide to inhibit the growth of mould
  • Non corrosive neutral cure formula

Ideal For 

  • Bathrooms, kitchens, and laundries – including shower screens, baths, spas, sinks and plumbing fixtures in most materials.
Categories: ,
Size 75g and 300g Cartridge
Colour Clear and white
Technology Neutral Cure Silicone
Use Interior/Exterior Application

Where can this product be used?

  • Showers
  • Baths
  • Spas
  • Sinks

What materials is this product suitable for?

  • Ceramic
  • Glazed and porcelain fixtures
  • Metal
  • Copper and brass fittings
  • Powder coated Aluminium
  • Aluminium
  • Plastic laminates
  • Rubber
  • Glass
  • Stainless Steel
  • Concrete
  • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.

How To Use

   Use in a well ventilated area. Avoid contact with skin and eyes.

  1. Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry).
  2. Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
  3. Pierce tube with reversed side of cap.
  4. Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle.
  5. Apply on needed surface and, smoothen with a scraper or spatula.
  6. Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 2 hours before using the area.


  • Not paintable. Complete painting 7 days prior to applying sealant.
  • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use
  • Not suitable for building materials that bleed oils or solvents, such as impregnated wood
  • Not for aquariums or contact with food, eating utensils or drinking water

Handy Tips

  • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
  • Work in sections that can be completed before sealant skins.
  • Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.

Clean Up

  • While the sealant is still wet, clean off excess sealant with a cloth soaked with acetone
  • Cured product can be removed with Selleys Silicone Remover or by
    cutting and scraping

Data Sheet

SDS-Wet Area Speed Seal

TDS-Wet Area Speedseal